Copper Powder
Copper powder for powder metallurgy, diamond tool segments and alloying additions.
Copper is the workhorse of powder metallurgy. It presses and sinters readily, it alloys with iron to raise strength, and in diamond tool segments it forms part of the bond matrix that holds the diamond in place and wears at a controlled rate.
It is also used as an alloying addition in weathering steels and in some welding consumables.
Forms & grades supplied
- Powder
- Screened to your agreed size range
- PM and diamond tool grades
Industries served
Ask us for
- Chemical specification and test certificate
- Particle size / mesh range
- Packing options and lead time
- A sample for trial
Standard grades
The grades below are the standard specifications this material is traded to. We supply against your specification — tell us the grade and we will confirm what we can hold.
| Grade | Cu purity | Apparent density (g/cc) | Particle size | Where it is used |
|---|---|---|---|---|
| Electrolytic | 99.7% | 0.6–1.8 | 20–400 mesh (mean 45 µm) | Diamond tools, sintered parts, carbon brushes, electrical contacts, welding rods |
| Atomised | 99.7% | 2.6–4.2 | 40–325 mesh | Pressed and sintered parts, friction materials |
Scroll the table sideways to see every column
Dendritic electrolytic powder green-strengths well and is the usual grade for pressed and sintered parts. Atomised powder is more spherical and flows better. Tell us the application and we will point you at the right one.
Please note. These are indicative industry-standard ranges shown for guidance. Where a grade name encodes a nominal sieve or density, that is what the designation means in the trade — the size range actually supplied, and the packing, are set to your requirement and confirmed on your order. The binding specification for any order is the one on your purchase order and the test certificate supplied with the consignment — see how we test and certify a lot. Ask us for a datasheet for the exact grade you need.
Sizing
Size is specified separately from chemistry, and it is usually the figure that decides whether a powder works in your process. We grind and screen to the range on your order — tell us the mesh you need.
What a mesh number means
Mesh counts the openings per linear inch of the test sieve, so a higher number is a finer powder. “−100 mesh” means the material passes a 100 mesh sieve. We screen against test sieves to the published ASTM E11 / ISO 3310-1 series.
Where each band is used
General guidance on the ranges these industries work in, useful if you are specifying a powder for the first time. It describes the trade, not our production.
| Application | Typical band | Why |
|---|---|---|
| Welding electrode coatings and flux | 20 – 100 mesh | Coarser powders, blended into the coating slurry. |
| Powder metallurgy — pressing and sintering | 60 – 200 mesh | Iron and copper powders for pressed parts; apparent density matters as much as size. |
| Thermal spray and hardfacing | 100 – 325 mesh | Tighter distributions, since feed behaviour depends on it. |
| Metal injection moulding and additive | 170 – 400 mesh | The finest bands, with close control of the distribution at both ends. |
Scroll the table sideways to see every column
Particle size is made to your requirement. We grind and screen Copper Powder to the range on your order rather than to a fixed house standard — tell us the mesh or micron range you need and we will confirm what we hold and what we can produce to.
A note on the bands above. They are general industry guidance and are not a statement of what we supply — our own standard range is the line marked above, and it is confirmed against your order rather than read off a chart. Ask us for the size range you need.
Where Copper Powder is used
- Powder metallurgy components and bearings
- Diamond tool and grinding segment bonds
- Friction materials
- Alloying additions
Related products
Aluminium Powder
Atomised aluminium powder used as a deoxidiser and as an exothermic addition.
View productChromium Metal Powder
High-purity chromium for stainless-grade consumables, PM parts and diamond tools.
View productIron Powder
Bulk metallic addition for electrode coatings, flux cored wires and PM components.
View productManganese Metal Powder
A low-carbon manganese unit for consumables and powder metallurgy blends.
View productMolybdenum Metal Powder
High-purity molybdenum for demanding alloying and powder metallurgy applications.
View productNickel Metal
Nickel additions for stainless, low-temperature and hard-facing consumables.
View product